Water Treatment Chemical

Product Details:

Calcium chloride is an inorganic compound.Calcium chloride is commonly encountered as a hydrated solid.These compounds are mainly used for deicing and dust control. Because the anhydrous salt is hygroscopic, it is used as a desiccant.for exam : De-icing and freezing point depression , Road surfacing , Water treatment , Food , Laboratory and related drying operations , Medicine , Cardiac arrest , Animal sterilization.

Additional Information:

• Delivery Time: READY TO STOCK

Product Details:

One significant application of calcium hydroxide is as a flocculant, in water and sewage treatment. It forms a fluffy charged solid that aids in the removal of smaller particles from water, resulting in a clearer product. This application is enabled by the low cost and low toxicity of calcium hydroxide. It is also used in fresh water treatment for raising the pH of the water so that pipes will not corrode where the base water is acidic, because it is self-regulating and does not raise the pH too much.

Additional Information:

• Delivery Time: READY TO STOCK

Product Details:

Non Ferric Alum is a purer form of aluminum sulphate. It isused in better grades of paper for loading and sizing purposes. Non Ferric Alum is manufactured fromaluminium trihydrate whereas ferric alum uses bauxite as the raw material. The raw material is cooked with sulphuric acid under suitable conditions.

Additional Information:

• Pay Mode Terms: Other

Product Details:

Activated alumina is used for a wide range of adsorbent and catalyst applications including the adsorption of catalysts in polyethylene production, in hydrogen peroxide production, as a selective adsorbent for many chemicals including arsenic, fluoride, in sulphur removal from gas streams (Claus Catalyst process).

Additional Information:

• Item Code: 38029011
• Pay Mode Terms: Other
• Delivery Time: READY STOCK

Product Details:

The compound is used as a desiccant (to keep things dry by absorbing water from the air) and as a filter of fluoride, arsenic and selenium in drinking water. It is made of aluminium oxide (alumina; Al₂O₃).

Additional Information:

• Delivery Time: READY TO STOCK

Product Details:

Activated carbon, also called activated charcoal, is a form of carbon processed to have small, low-volume pores that increase the surface area^[1][2] available for adsorption or chemical reactions.^[3] Activated is sometimes substituted with activeActivated carbon, also called activated charcoal, is a form of carbon processed to have small, low-volume pores that increase the surface area available for adsorption or chemical reactions. Activated is sometimes substituted with active

Product Details:

Ferric alum is a less pure form of aluminum sulphate. It is used in lower grades of paper for loading and sizing purposes. Ferric alum uses bauxite as the raw material. The raw material is cooked with sulphuric acid under suitable conditions.

Hydrated form, Al2 (SO4)3 .18H2O is commonly known as Alum.Ferric Alum is known as Ferric Aluminium Sulphate.It is the Alum with Iron content. White crystalline solid, with a sweet taste.

Ferric alum Al2O3  15-16% Insoluble form 4.5% Slab 20.kg

Product Details:

As a mixture with lime and calcium chloride, it is marketed as chlorine powder or bleach powder for water treatment and as a bleaching agent. This compound is relatively stable and has greater available chlorine than sodium hypochlorite (liquidbleach). It is a white solid, although commercial samples appear yellow.

Product Details:

Calcium hypochlorite is an inorganic compound with formula Ca(ClO)₂. As a mixture with lime and calcium chloride, it is marketed as chlorine powder or bleaching powder for water treatment and as a bleaching agent. This compound is relatively stable and has greater available chlorine than sodium hypochlorite (liquid bleach). It is a white solid, although commercial samples appear yellow. It strongly smells of chlorine, owing to its slow decomposition in moist air. It is not highly soluble in hard water, and is more preferably used in soft to medium-hard water. It has two forms: dry and hydrated.

Product Details:

The physical properties of polyelectrolyte solutions are usually strongly affected by this degree of charging. Since the polyelectrolyte dissociation releases counter-ions, this necessarily affects the solution's ionic strength, and therefore the Debye length. This in turn affects other properties, such as electrical conductivity.

Additional Information:

• Pay Mode Terms: Other
• Delivery Time: READY STOCK

Product Details:

As a mixture with lime and calcium chloride, it is marketed as chlorine powder or bleach powder for water treatment and as a bleaching agent. This compound is relatively stable and has greater available chlorine than sodium hypochlorite (liquidbleach). It is a white solid, although commercial samples appear yellow.

Product Details:

It is widely used to dissolve limescale. Its usefulness arises because of its role as a hexadentate ("six-toothed") ligand and chelating agent, i.e., its ability to sequester metal ions such as Ca²⁺ and Fe³⁺. After being bound by EDTA into a metal complex, metal ions remain in solution but exhibit diminished reactivity.

Additional Information:

• Delivery Time: READY TO STOCK

Product Details:

Ethylenediaminetetraacetic acid is white crystal powder, soluble in sodium hydroxide, sodium carbonate and ammonia solution, not soluble in cold water, acid and common organic solvents, and discomposed at 240°C. Mainly applied to complex metal ions, and separating metal; used as water-treating agents and scale-eliminating agents; capable of preventing the harmful effects on production caused by metal ions in water ; also used in the cleaning the boilers in large-scale power plants.

EDTA can be used in Food, Beverage, Pharmaceutical, Health & Personal care products, Agriculture/Animal Feed/Poultry.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

The resulting brown, acidic, and corrosive solution is used as a flocculant in sewage treatment and drinking water production, and as an etchant for copper-based metals in printed circuit boards.Anhydrous iron(III) chloride is a fairly strong Lewis acid, and it is used as a catalyst in organic synthesis.

Additional Information:

• Item Code: 7705-08-0

Product Details:

It is a colorless crystal or white powder and is obtained when calcium oxide (called lime or quicklime) is mixed, or slaked with water. It has many names including hydrated lime, caustic lime, builders' lime, slack lime, cal, or pickling lime.It has many names including hydrated lime, caustic lime, builders' lime, slack lime, cal, or pickling lime. It is used in many applications, including food preparation. It is relatively insoluble in water.

One significant application of hydrated lime is as a flocculant, in water and sewage treatment. It forms a fluffy charged solid that aids in the removal of smaller particles from water, resulting in a clearer product. This application is enabled by the low cost and low toxicity of hydrated lime.

It is also used in fresh water treatment for raising the pH of the water so that pipes will not corrode where the base water is acidic, because it is self-regulating and does not raise the pH too much.

Another large application is in the paper industry, where it is an intermediate in the reaction in the production of sodium hydroxide. This conversion is part of the causticizing step in the Kraft process for making pulp.

Because of its low toxicity and the mildness of its basic properties, hydrated lime is widely used in the food industry
.

Product Details:

Polyaluminium chloride (PAC) is manufactured in both liquid and powder form. The product is used in deodorants and antiperspirants, as a flocculant in water purification, in treatment of drinking / potable water, wastewater treatment and paper sizing.

Product Details:

Properties:

PMA is a solvent-based maleic acid hopolymer, with obvious threshold inhibition and crystal modification, and average molecular weight around 1000. It is the superior calcium carbonate inhibitor in high hardness, high alkalinity, and high temperature severe water conditions and a multifunctional formulation support agent in industrial water systems and other related applications.

PMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems.

Specification: Usage:

PMA has better performance when combined with phosphonates than when phosphonates used alone. PMA is compatible with quaternary ammonium compounds, while not affected by chlorine or other oxidizing biocides under normal use conditions.

Product Details:

The main application of sodium chlorite is the generation of chlorine dioxide for bleaching and stripping of textiles, pulp, and paper. It is also used for disinfection of municipal water treatment plants after conversion to chlorine dioxide.

Properties of Technical Sodium Chlorite Solution 31.25 Sodium Chlorite, min (%) 24.25 Sodium Chloride, max (%) 3.0 Inert Ingredients, mixture of other sodium salts (%) 3 - 4 Water, (%) 68.25 – 75.75 Appearance clear, pale yellow Density @ 25ºC (lb/gal) 10.2 Crystallization Point (ºC) -7

Additional Information:

• Item Code: 7647-14-5
• Delivery Time: READY STOCK

Product Details:

It is mainly used as a disinfectant, biocide and industrial deodorant. It is found in some modern water purification tablets/filters. It is more efficient than the formerly used halazone water disinfectant. In these applications, it is a slow-release source of chlorine in low concentrations at a relatively constant rate. As a disinfectant, it is used to sterilize drinking water, swimming pools, tableware and air, and to fight against infectious diseases as a routine disinfection agent.

It can be used as a preventative; for disinfection and environmental sterilization, for example in livestock, poultry, fish and silkwormraising; bleaching textiles and cleaning industrial circulating water and also to prevent wool from shrinking.

 

Product Details:

Trichloroisocyanuric acid is an organic compound with the formula (C₃Cl₃N₃O₃). It is used as an industrial disinfectant, bleaching agent and a reagent in organic synthesis.^[1][2][3]

Additional Information:

• Item Code: 87-90-1
• Delivery Time: READY STOCK

Product Details:

Nitrilotriacetic Acid Trisodium Salt ( NTA-3NA) Typical Properties

The trisodium salt of nitrilotriacetic acid (NTA) is used in laundry detergents as a "builder" to replace phosphates because of its ability to chelate calcium and magnesium ions (1). NTA is used extensively in the treatment of boiler water to prevent the accumulation of mineral scale and, to a lesser extent, in photography, textile manufacture, paper and cellulose production, and metal plating and cleaning operations.

Additional Information:

• Pay Mode Terms: Other

Product Details:

• High Explosive Dual Purpose anti-tank / fragmenting warhead
• Etidronic acid or etidronate
• High energy density physics
• the Higher Education Development Program of the Commission on Higher Education (Philippines

Additional Information:

• Pay Mode Terms: Other
• Delivery Time: READY STOCK

Product Details:

It is used as an industrial disinfectant, bleaching agent and a reagent in organic synthesis.^[1][2][3] This white crystalline powder, which has a strong "chlorine odour," is sometimes sold in tablet or granule form for domestic and industrial use.

The compound is a disinfectant, algicide and bactericide mainly for swimming pools and dyestuffs, and is also used as a bleachingagent in the textile industry. It is widely used in civil sanitation for pools and spas, preventing and curing diseases in animal husbandry and fisheries, fruit and vegetable preservation, wastewater treatment, as an algicide for recycled water in industry and air conditioning, in anti shrink treatment for woolens, for treating seeds and in organic chemical synthesis.

Trichloroisocyanuric acid as used in swimming pools is easier to handle than chlorine. It dissolves slowly in water, but as it reacts, cyanuric acid concentration in the pool will build-up.

Product Details:

Di Sodium HEDP 50% & 60% It is an organophosphonic acid corrosion inhibitor, it can chelate with Fe, Cu, and Zn ions, it can dissolve the oxidized materials, it has good scale and corrosion inhibition effects even under 250¿¿¿, it is stable under high pH value, not easy to be hydrolyzed, not easy to be decomposed under normal light and heat condition, its acid/alkaline and chloride oxidation tolerance are better than that of other organophosph-onic acids. HEDP

Na₂ can form six-ring chelating compounds with metal ions in water system, Ca2+ in particular.

HEDP

Na₂ has good scale inhibition effects and obvious dissolution threshold effects. When used with other Water Treatment Chemicals, the synergistic effects is better.

Specification: Usage:

HEDP•Na₂ is widely used in circulating cool water system, medium and low pressure boiler, oil field water pipelines as scale and corrosion inhibitor in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, HEDP•Na₂ is used as detergent for metal and nonmetal. In dyeing industry, HEDP•Na₂ is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP•Na₂ is used as chelating agent.

Product Details:

Anonic Polyelectrolyte Acurofloc AT124 is an organic based copolymer flocculant’s designed for effectively enhancing the clarification and filtration in sugar process applications in a most economical way. This Anionic Polyelectrolyte Acurofloc AT124 product works in any complex systems where there is a wide fluctuation in the suspended solids due to different effluent characteristics.
Anionic Polyelectrolyte is having an anionic character due to which the suspended impurities present in the effluent in the form of silt, color and suspended solids to form floc .These floc in course of time gets aggregated and settles in the clarifier as sludge resulting in a crystal clear supernatant water. This Anionic Polyelectrolyte product is having a unique nature of working in any pH ranges. Improvement of the effluent color is also observed due to the settling of colored matter.

Additional Information:

• Pay Mode Terms: Other
• Delivery Time: READY STOCK

Product Details:

Product Details:

HEDP is used as a retardant in concrete, scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc. In light woven industry, HEDP is used as detergent for metal and nonmetal.

Additional Information:

• Delivery Time: Ready to stock

Product Details:

Morpholine is a common additive, in parts per million concentrations, for pH adjustment in both fossil fuel and nuclear power plantsteam systems. Morpholine is used because its volatility is about the same as water, so once it is added to the water, its concentration becomes distributed rather evenly in both the water and steam phases. Its pH-adjusting qualities then become distributed throughout the steam plant to provide corrosion protection. Morpholine is often used in conjunction with low concentrations of hydrazine or ammonia to provide a comprehensive all-volatile treatment chemistry for corrosion protection for the steam systems of such plants. Morpholine decomposes reasonably slowly in the absence of oxygen at the high temperatures and pressures in these steam systems.Morpholine is used as a chemical emulsifier in the process of waxing fruit. Naturally, fruits make waxes to protect against insects and fungal contamination, but this can be lost as the fruit is cleaned. A small amount of new wax is applied to replace it. Morpholine is used as an emulsifier and solubility aid for shellac, which is used as a wax for fruit coating.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

It is widely used to dissolve limescale. Its usefulness arises because of its role as a hexadentate ("six-toothed") ligand and chelating agent, i.e., its ability to sequester metal ions such as Ca²⁺ and Fe³⁺. After being bound by EDTA into a metal complex, metal ions remain in solution but exhibit diminished reactivity.

Additional Information:

• Item Code: 13235-36-4
• Delivery Time: READY STOCK

Product Details:

Nitrilotriacetic acid (NTA), is a polyamino carboxylic acid that are mostly used as a chelating agent. These compounds are completely biodegradable and highly stable. We can offer NTA in different grades and compositions based upon the requirement of the clients. Our portfolio includes NTA (Nitrilotri acetic acid), Trisodium NTA (Liquid) and Trisodium NTA (Powder).

The uses of NTA are similar to those of EDTA, both being chelating agents. It is used for water softening and as a replacement to sodium and potassium triphosphate in detergents, and cleansers.

Additional Information:

• Pay Mode Terms: Other
• Delivery Time: ready stock

Product Details:

Cyclohexylamine is used as an intermediate in synthesis of other organic compounds. It is the precursor to sulfenamide-based reagents used as accelerators for vulcanization. It is a building block for pharmaceuticals (e.g., mucolytics, analgesics, and bronchodilators). The amine itself is an effective corrosion inhibitor. Some sweeteners are derived from this amine, notably cyclamate. The herbicide hexazinone and the anesthetic hexylcaine are derived from cyclohexylamine.

Additional Information:

• Item Code: 108-91-8
• Delivery Time: READY STOCK

Product Details:

Urea is the most important nitrogenous fertilizer in the country because of its high N content (46%N). Besides its use in the crops, it is used as a cattle feed supplement to replace a part of protein requirements.

Additional Information:

• Pay Mode Terms: Other
• Delivery Time: READY STOCK

Product Details:

Filter Aids is a group of inert materials that can be used in filtration pretreatment. Certain filter aids may be used to aid filtration. These are often incompressible diatomaceous earth, or kieselguhr, which is composed primarily of silica. Also used are wood cellulose and other inert porous solids such as the cheaper and safer perlite.

Additional Information:

• Item Code: 91053-39-3
• Delivery Time: READY STOCK

Product Details:

A solution of glutaraldehyde, typically of 10% w/w, is sold under various trade names to remove common and plantar warts. It is said to inactivate viruses and bacteria, and to dry the skin, facilitating physical removal of the wart.Trade names include Diswart Solution and Glutarol.It is used as a biocide for system disinfection and as a preservative for long term storage. It is a sterilant, killing endospores in addition to many microorganisms and viruses.

Additional Information:

• Item Code: 29121990
• Pay Mode Terms: Other
• Delivery Time: READY STOCK